%0
Statics and Mechanics of Materials 5e SI Units - Hibbeler, Russell C.

Statics and Mechanics of Materials 5e SI Units

Russell C. Hibbeler

Yayınevi: Pearson Education

Yayın tarihi: 12/2017

ISBN: 9781292177915

İngilizce | 928 Sayfa |

Tür: Genel Mühendislik

  • 166,00 TL

Statics and Mechanics of Materials represents a combined abridged version of two of the author’s books, namely Engineering Mechanics: Statics, Fourteenth Edition and Mechanics of Materials, Tenth Edition with Statics and Mechanics of Materials represents a combined abridged version of two of the author’s books, namely Engineering Mechanics: Statics, Fourteenth Edition in SI Units and Mechanics of Materials, Tenth Edition in SI Units. It provides a clear and thorough presentation of both the theory and application of the important fundamental topics of these subjects that are often used in many engineering disciplines. The development emphasizes the importance of satisfying equilibrium, compatibility of deformation, and material behavior requirements. The hallmark of the book, however, remains the same as the author’s unabridged versions, and that is, strong emphasis is placed on drawing a free-body diagram, and the importance of selecting an appropriate coordinate system and an associated sign convention whenever the equations of mechanics are applied. Throughout the book, many analysis and design applications are presented, which involve mechanical elements and structural members often encountered in engineering practice.

Table of Contents

1 General Principles

Chapter Objectives

1.1 Mechanics

1.2 Fundamental Concepts

1.3 The International System of Units

1.4 Numerical Calculations

1.5 General Procedure for Analysis

2 Force Vectors

Chapter Objectives

2.1 Scalars and Vectors

2.2 Vector Operations

2.3 Vector Addition of Forces

2.4 Addition of a System of Coplanar Forces

2.5 Cartesian Vectors

2.6 Addition of Cartesian Vectors

2.7 Position Vectors

2.8 Force Vector Directed Along a Line

2.9 Dot Product

3 Force System Resultants

Chapter Objectives

3.1 Moment of a Force–Scalar Formulation

3.2 Cross Product

3.3 Moment of a Force–Vector Formulation

3.4 Principle of Moments

3.5 Moment of a Force about a Specified Axis

3.6 Moment of a Couple

3.7 Simplification of a Force and Couple System

3.8 Further Simplification of a Force and Couple System

3.9 Reduction of a Simple Distributed Loading

4 Equilibrium of a Rigid Body

Chapter Objectives

4.1 Conditions for Rigid-Body Equilibrium

4.2 Free-Body Diagrams

4.3 Equations of Equilibrium

4.4 Two- and Three-Force Members

4.5 Free-Body Diagrams

4.6 Equations of Equilibrium

4.7 Characteristics of Dry Friction

4.8 Problems Involving Dry Friction

5 Structural Analysis

Chapter Objectives

5.1 Simple Trusses

5.2 The Method of Joints

5.3 Zero-Force Members

5.4 The Method of Sections

5.5 Frames and Machines

6 Center of Gravity, Centroid, and Moment of Inertia

Chapter Objectives

6.1 Center of Gravity and the Centroid of a Body

6.2 Composite Bodies

6.3 Moments of Inertia for Areas

6.4 Parallel-Axis Theorem for an Area

6.5 Moments of Inertia for Composite Areas

7 Stress and Strain

Chapter Objectives

7.1 Introduction

7.2 Internal Resultant Loadings

7.3 Stress

7.4 Average Normal Stress in an Axially Loaded Bar

7.5 Average Shear Stress

7.6 Allowable Stress Design

7.7 Deformation

7.8 Strain

8 Mechanical Properties of Materials

Chapter Objectives

8.1 The Tension and Compression Test

8.2 The Stress—Strain Diagram

8.3 Stress—Strain Behavior of Ductile and Brittle Materials

8.4 Strain Energy

8.5 Poisson’s Ratio

8.6 The Shear Stress—Strain Diagram

9 Axial Load

Chapter Objectives

9.1 Saint-Venant’s Principle

9.2 Elastic Deformation of an Axially Loaded Member

9.3 Principle of Superposition

9.4 Statically Indeterminate Axially Loaded Members

9.5 The Force Method of Analysis for Axially Loaded Members

9.6 Thermal Stress

10  Torsion

Chapter Objectives

10.1 Torsional Deformation of a Circular Shaft

10.2 The Torsion Formula

10.3 Power Transmission

10.4 Angle of Twist

10.5 Statically Indeterminate Torque-Loaded Members

11 Bending

Chapter Objectives

11.1 Shear and Moment Diagrams

11.2 Graphical Method for Constructing

Shear and Moment Diagrams

11.3 Bending Deformation of a Straight Member

11.4 The Flexure Formula

11.5 Unsymmetric Bending

12 Transverse Shear

Chapter Objectives

12.1 Shear in Straight Members

12.2 The Shear Formula

12.3 Shear Flow in Built-Up Members

13 Combined Loadings

Chapter Objectives

13.1 Thin-Walled Pressure Vessels

13.2 State of Stress Caused by Combined Loadings

14 Stress and Strain Transformation

Chapter Objectives

14.1 Plane-Stress Transformation

14.2 General Equations of Plane-Stress Transformation

14.3 Principal Stresses and Maximum In-Plane Shear Stress

14.4 Mohr’s Circle–Plane Stress

14.5 Absolute Maximum Shear Stress

14.6 Plane Strain

14.7 General Equations of Plane-Strain Transformation

*14.8 Mohr’s Circle–Plane Strain

*14.9 Absolute Maximum Shear Strain

14.10 Strain Rosettes

14.11 Material Property Relationships

15 Design of Beams and Shafts

Chapter Objectives

15.1 Basis for Beam Design

15.2 Prismatic Beam Design

16 Deflection of Beams and Shafts

Chapter Objectives

16.1 The Elastic Curve

16.2 Slope and Displacement by Integration

*16.3 Discontinuity Functions

16.4 Method of Superposition

16.5 Statically Indeterminate Beams and Shafts–Method of Superposition

17 Buckling of Columns

Chapter Objectives

17.1 Critical Load

17.2 Ideal Column with Pin Supports

17.3 Columns Having Various Types of Supports

*17.4 The Secant Formula

Appendix

A Mathematical Review and Expressions

B Geometric Properties of An Area and Volume

C Geometric Properties of Wide-Flange Sections  

D Slopes and Deflections of Beams

Preliminary Problems Solutions

Fundamental Problems

Solutions and Answers

Selected Answers

Index

Motor Kurye ile Teslim
Bu Ürünün Bulunduğu Şubelerimiz:
  • pandora.com.tr
  • Boğaziçi Üniversitesi
  • Koç Üniversitesi

Statics and Mechanics of Materials için şu an mevcudu olmayanlar

İlgili Ürünler

Bu Türde Çok Satanlar

Kredi Kartına Taksit İmkanı
  • 3 Taksit

  • 3 Taksit

  • 3 Taksit

©1996-2019 Pandora Yayın ve Kitap Hizmetleri A.Ş.

Mersis No: 0721-0430-4310-0015

Tasarım : Logo Site Tasarımı